DOCUSP 3.6.xx
2-2
XEROX DOCUMENT SERVICES PLATFORM SERIES
GETTING STARTED
Caveat
Applicable printer product
When a copy sensitive FORM command
causes a change to the back side, side 2, of a
page, the form does not print on side 2 but
prints on side 1 of the next page.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
A DJDE syntax error is raised when a DJDE
command RTEXT=(TEST) is used, where
TEST is the name of a TST file.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
If an LCDS job is submitted after a DocuSP
restart, a fault clearance message may
appear. Clear the fault and the system prints
correctly.
DocuTech/DocuPrint 75/90
DocuPrint 1xx EPS
A large number (e.g. 100+) of jobs submitted
with the printer paused causes the printer to
cycle down intermittently after the printer
resumes printing. Single page printing
performance is very slow. Do not submit a
large number of single page jobs while the
printer is paused.
DocuTech/DocuPrint 90
After changing the output order or output
delivery of a printing job, and then selecting
Apply Properties Now, the system hangs.
Restart the system, then delete and resend
the job.
DocuTech/DocuPrint 75/90
Do not attempt to program a paper tray that
contains ordered stock and is currently being
used by a printing job.
DocuTech/DocuPrint 75/90
After a restart of the DocuSP software, the
Queue Manager, Printer Manager,
Administration, Job Manager, and Reprint
Manager windows may take up to 5 minutes to
come up. As a workaround, exit power saver
mode before restarting the system, or power
on power off the printer during the restart.
DocuTech/DocuPrint 75/90
Any job with a paper size US Legal or US
Letter short edge feed and single portrait
stitching becomes ineligible with the message
“Job was received with a programming
conflict. Finishing is not available for jobs with
this media orientation.”
DocuTech/DocuPrint 75/90
The system may display an unclearable Reset
message. The system prints normally.
DocuTech/DocuPrint 75/90
When Offset stacking is enabled, stitched jobs
do not offset.
DocuTech 61xx
