Xerox Phaser 6115 MFP, Service Manual, Page: 493 / 532

Phaser 6115MFP Multifunction Product Service Manual 10-3
Wiring Diagrams
Print Engine Board Plug/Jack Designators
Print Engine Plug/Jack Designators
Map P/J Coordinates Remarks
1 P/J1 J-137 Connects the Engine Control Board to CN1 of the Image Processor Board.
1 P/J2 B-137 Connects the Engine Control Board to CN4 of the DC Power Supply 1.
1 P/J3 B-135 Connects the Engine Control Board to CN6 of the DC Power Supply 1.
1 P/J4 C-141 Connects the Engine Control Board to the Power Supply Cooling Fan.
1 P/J5 G-135 Connects the Engine Control Board to the Rack Positioning sensor, and the Rack and
Developing motors.
1 P/J6 H-134 Connects the Engine Control Board to the Exit Sensor.
1 P/J7 I-134 Connects the Engine Control Board to the Thermistor.
1 P/J8 D-135 Connects the Engine Control Board to the Main Motor.
1 P/J9 F-134 Connects the Engine Control Board through CN1 to the IDC, Belt Positioning, and cleaning
Blade Sensors.
1 P/J10 C-135 Connects the Engine Control Board to the Fusing and Ventilation Motors, and the cleaning
blade solenoid.
1 P/J11 C-141 Connects the Engine Control Board to the Registration Solenoid and the 2nd Image Transfer
Solenoid.
1 P/J12 D-141 Connects the Engine Control Board to the Registration and Transparency Sensors.
1 P/J13 E-141 Connects the Engine Control Board through to the Fusing Paper Loop and 2nd Image Transfer
Sensors.
1 P/J14 F-141 Connects the Engine Control Board through CN1 to the Waste Toner Detect Board and the DC
Power Supply 1.
1 P/J15 D-138 Connects the Engine Control Board to the Temperature/Humidity Sensor.
1 P/J16 C-138 Connects the Engine Control Board to the Tray 1 Paper Empty Sensor.
1 P/J17 G-141 Not connected.
1 P/J18 H-141 Connects the Engine Control Board to the High Voltage Power Supply.
1 P/J19 B-139 Connects the Engine Control Board to the Laser Unit through connector P/J1 on the Laser.
1 P/J20 C-140 Connects the Engine Control Board directly to the Laser Unit.
1 P/J21 I-139 Connects the Engine Control Board to the Duplex Control Board.
1 P/J22 C-141 Connects the Engine Control to the 500-Sheet Feeder Control Board.
1 P/J23 C-140 Not connected.
2 P/J1 B-139 Connects the Image Processor Board to the speaker.
2 P/J2 A-140 Connects the Image Processor Board to DC Power Supply 1.
2 P/J3 D-141 Connects the Image Processor Board to the Laser Unit.
2 P/J4 E-136 Connects the Image Processor Board to the NCU Board.
2 P/J6 I-135 Connects the Image Processor Board to the Scanner Board.
2 P/J7 J-135 Connects the Image Processor Board to the Control Panel Board.
2 P/J8 H-134 Connects the Image Processor Board to the Scanner Motor through Connector CN10.