Administrator Tools
Xerox
®
Phaser
®
3330 Printer
91
System Administrator Guide
Updating the Printer Software
You can update your printer when Xerox releases a new version of printer software or firmware.
Before you begin:
•
Determine the current software version of your printer.
•
Download the latest software update. From the Xerox Support website at
www.xerox.com/office/3330support
, select the
.hd
file.
Determining the Printer Software Version
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
General Setup
>
Configuration
.
2.
To verify the software installed on your printer, scroll down to
Software Versions
.
Enabling Upgrades
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
Maintenance
.
2.
Click
Upgrade
Management
.
3.
For Software Upgrade, select
Enabled
.
Updating the Software Using a USB Flash Drive
1.
Copy the software
.dlm
file to your USB Flash drive.
2.
Insert your USB Flash drive in a USB port on the printer.
3.
Navigate to
Print from USB
, then press
OK
.
4.
Select the file, then touch
OK
.
5.
When the process completes, the printer restarts automatically.
6.
To verify that the software has updated, check the configuration report.
Installing Software Upgrades in Xerox
®
CentreWare
®
Internet Services
To install software upgrades in Xerox
®
CentreWare
®
Internet Services:
1.
In Xerox
®
CentreWare
®
Internet Services, click
Properties
>
Maintenance
.
2.
Click
Firmware
Upgrade
.
3.
To locate and select the firmware upgrade file in .dlm format, click
Browse
or
Choose File
.
4.
Click
Open
.
5.
Click
Install Software
.
6.
To verify that the software has updated, check the configuration report.
Note:
Software installation begins several minutes after you submit the software to the printer.
Xerox
®
CentreWare
®
Internet Services is unavailable while the software is installing.
Summary of Contents for Phaser 3330
Page 1: ...Xerox Phaser 3330 Printer System Administrator Guide...
Page 10: ......
Page 58: ......
Page 78: ......
