Xerox Phaser 3121 Manual Download Page 17

Page: 17 / 136

NTRODUCTION

Understanding the Control Panel

On Line/Error(

) and Toner

Save(

) LEDs

LED

Description

If the

lights green, the printer is ready to print.

If the

lights red, the printer is experiencing an error,

such as jammed paper, the open cover or the empty toner
cartridge. See “Troubleshooting Error Messages” on page
6.18.

If you press the

button while the printer is receiving

data, the

LED blinks red to cancel printing.

In Manual Feed mode, if there is no paper in the Manual

Feeder, the

LED blinks red. Load paper into the Manual

Feeder and the LED stops blinking.

If the printer is receiving data, the

LED slowly blinks

green.

If the printer is printing the received data, the

LED

blinks green fast.

Summary of Contents for Phaser 3121









































































































































Search results

Summary of Contents for Phaser 3121

Reviews:

Related manuals for Phaser 3121

Brands by name

Popular brands

Xerox Phaser 3121, Manual

Search results

Summary of Contents for Phaser 3121

Reviews:

Related manuals for Phaser 3121

Brands by name

Popular brands