CentreWare® Internet Services
Xerox® Phaser® 3052/3260
User Guide
17
Configure Wireless Connectivity Using CentreWare Internet Services
(Phaser 3052NI, 3260DI, and 3260DNI)
Note:
The machine will not connect to the wireless network while the network cable is attached.
1.
At your workstation, open the Web browser and enter the IP Address of the machine in the
Address Bar.
2.
Press
Enter
.
3.
Select
Properties
.
4.
If prompted, enter the
admin
for the ID
and
1111
for the Password, and select
Login
.
5.
Select
Properties.
6.
In the
Network
Settings
link, select the
Wi-Fi
link. Then select the
Wi-Fi
link below that.
7.
The
Connection Status
shows the
Link Status
of the wireless connection.
8.
The Wireless Settings area provides options to configure wireless connectivity. The options are
Easy Wireless Settings
and
Advanced Settings
, and are explained below.
Use the Easy Wireless Settings Wizard
1.
Select the
Easy Wi-Fi Settings Wizard
button to have the machine find the WPS Settings
automatically. The SSID screen appears with a list of available wireless networks.
2.
Select the required
Network Name SSID
and click
Next
.
3.
If encryption is required:
a.
Enter the
WPA Shared Key
.
b.
Enter the
Confirm Network Key
and click
Next
.
4.
The Wireless Setup Confirmation screen displays. Click
Apply
.
Configure Advanced Wireless Settings
1.
Select the
Advanced Settings
Custom
button. The
Advanced Wireless Setup
screen appears.
2.
To enable
Wireless Radio
, select
On
from the Wireless Radio menu.
3.
Select the required option for
SSID:
•
Select
Search List
and select the required network from the drop-down menu. Click the
Refresh
button to update the list of networks available.
•
Select
Insert New SSID
to enter a new wireless network name.
4.
In the
Security Setup
area:
a.
Select the required method of
Authentication
.
b.
Select the required method of
Encryption
.
5.
Depending on your selections you may be required to enter some or all of the following
information for the
Network Key Setup
.
a.
Select the required option for
Using Key
.
b.
The
Hexadecimal
option may be enabled. Click the
Hexadecimal
check box to deselect if
required.
c.
Enter the required
Network Key
and
Confirm Network Key
.
6.
Depending on your selections you may be required to enter
802.1x Security Setup
information.
Summary of Contents for Phaser 3052NI
