Xerox Nuvera User Manual Download Page 260

Page: 260 / 294

Size

Paper TypeFeed Ori-

entation

LEF(long edge feed)

SEF (short edge

feed)

Inches

317.5 x 469.9

12.5 x 18.5

4 up-6 x 9

182 x 257

7.17 x 10.2

B5 - JIS

203.2 x 254

8 x 10

252 x 358

9.92 x 14.09

SB4

257 x 364

10.12 x 14.33

B4-JIS

203.2 x 330.2

8 x 13

210 x 330

8.27 x 12.99

210 x 330

215 x 330

8.46 x 12.99

215 x 330

215.9 x 330.2

8.5 x 13

Foolscap - XE

220 x 330

8.66 x 12.99

220 x 330

210 x 270

8.27 x 10.63

210 x 270

215.9 x 355.6

8.5 x 14

Legal

Recommendations for Paper Usage

Usage Recommendation

Paper Type

Not supported on systems with a Multifunction Finisher.

Coated stocks

Otherwise, stocks coated on both or only one side are supported. When
printing on stocks that have only one side coated, load the coated side up.

For systems that do not have the Productivity Pack license enabled:

Paper weight range

• Normal: 52 - 84 gsm (standard copier paper, inkjet paper)

• Medium: 85 - 105 gsm (slightly heavier than Normal. Good for brochures,

advertisements)

• Heavy: 106 - 300 gsm (index cards, cover stock, posters)

For systems with the Productivity Pack license enabled, you can enter the
paper weights for the stock that is being loaded.
When using the BFM, the system supports:

• 52 gsm - 300 gsm uncoated stock

• 90 gsm - 300 gsm coated stock

Xerox

Nuvera

21-4

User Guide and Training Aid (UGTA)

Machine Specifications

Summary of Contents for Nuvera







































































































































































































































































































Search results

Summary of Contents for Nuvera

Reviews:

Related manuals for Nuvera

Brands by name

Popular brands

Xerox Nuvera, User Manual

Search results

Summary of Contents for Nuvera

Reviews:

Related manuals for Nuvera

Brands by name

Popular brands