Xerox Nuvera, User Manual

Page: 186 / 294

To add a new queue on systems with the Productivity Pack license enabled
1. In the Xerox Nuvera user interface, select the Queue Manager button.
2. Select the Queue pull-down list.
3. Select New. The New Queue dialog displays,
4. In the Queue Name field, enter a name of up to 25 characters. The name can consist of letters,
numbers, and underscores.
5. Select a quantity between 1 and 65,500 to indicate the default number of job sets to be printed for
all jobs sent to this queue, unless otherwise specified in the job itself.
6. Set a priority between 1 (highest priority) and 100 (lowest priority) for the queue.
7. Select the input format to indicate the manner in which jobs will be submitted to the queue.
8. Select a destination of either Print, Save, or Print and Save.
Print releases the document immediately for printing. Save saves the document to the location
designated in Save Location.
9. If desired, add a banner page message or job comments.
10. Make extended option selections from the Stock, Output, Image Quality, Image Edit, and PDL Settings
tabs.
11. Select decomposer (RIP) options on either the PostScript/PDF, Advanced PostScript, TIFF, PCL,
ASCII, or LCDS buttons.
12. Select Add Queue to complete the new queue.
13. Select Close to exit the New Queue dialog.
14. In the Queue list, right-click the new queue and choose Accept Jobs to enable the queue.
To view or modify queue properties with the Productivity Pack license enabled
1. In the Xerox Nuvera user interface, click the Queue Manager button.
2. Select a queue and double-click to open Queue Properties.
3. Modify queue settings as desired, then click OK to have your changes enabled by the system.
To view or modify queue properties of a single queue (Productivity Pack license
not enabled)
1. In the Xerox Nuvera user interface, select the System menu.
2. Select Printer > Defaults to open Queue Properties.
3. Modify queue settings as desired, then click OK to have your changes enabled by the system.
To copy a queue with the Productivity Pack license enabled
1. In the Xerox Nuvera user interface, click the Queue Manager button.
2. Right-click on a queue.
3. Select Copy. Rename the queue and set new queue properties.
4. Select Copy Queue.
5. Select Close.
The new queue is created.
Xerox ® Nuvera ® 14-62
User Guide and Training Aid (UGTA)
How Do I...