Xerox Legacy 4110, Printing Manual

Page: 12 / 24

S
ETTING
U
P
P
RINTING ON
M
AC
OS X 12
Setting up the Fiery EXP4110 on Mac OS X
After you install the printer driver files on Mac OS X, you must set up the Fiery EXP4110
in the Printer Setup Utility (or Print Center). This section describes how to set up the
Fiery EXP4110.
You must also configure the Fiery EXP4110 for the options installed on the printer to allow
the Fiery EXP4110 to take advantage of the printer options. Configure the options manually,
or for TCP/IP network connections, use the Two-Way Communication feature to configure
the options automatically.
N
OTE
:
For more information about the print settings that use these options, see Print Options .
T
O SET UP THE
F
IERY
EXP4110
IN THE
P
RINTER
S
ETUP
U
TILITY
(
OR
P
RINT
C
ENTER
)
1 Choose Applications from the Go menu, open the Utilities folder, and start Printer Setup
Utility (or Print Center).
The Printer List dialog box appears.
2 Click Add.
3 Choose AppleTalk or IP printing from the menu that appears.
4 For AppleTalk, choose the AppleTalk Zone and choose the name of the Fiery EXP4110.
Installable option Selections
Finisher Option None, D-Finisher
Folder Tray Option Not Installed, Folder Tray
Interposer Not Installed, Interposer
Booklet Tray Option Off, On
Optional Trays Not Installed, Trays 6 and 7 (HCF)
Punch Option Not Installed, 2/3 hole Punch, 2/4 hole Punch