Xerox Legacy 4110, Configuration And Setup

Page: 13 / 108

C
ONNECTING TO THE
N
ETWORK
13
Append one of the following suffixes that corresponds to the Fiery EXP4110 print
connection to the end of the NetWare queue names, as follows:
_print
_hold
_direct
N
OTE
: These suffixes must be in English and in all lowercase letters.
You do not need to perform Setup when you add or remove a NetWare queue. However,
always restart the Fiery EXP4110 after you create or remove a queue that will be connected
to the print server used by the Fiery EXP4110.
When the Fiery EXP4110 is configured to connect to a NetWare server, it polls the NetWare
server for jobs in each of its queues. If jobs are found, they are automatically transferred over
the network to the matching connection on the Fiery EXP4110. For example, jobs from the
NetWare queue with the
_print
suffix are sent to the Fiery EXP4110 Print queue.
• You can connect up to eight bindery servers to the Fiery EXP4110.
N
OTE
: The NetWare bindery server you select must not be in the same tree as the one
you selected in NDS Setup, if both NDS and bindery are used by the Fiery EXP4110.
AppleTalk networks
AppleShare servers require no special configuration.
UNIX networks
• When you configure a UNIX workstation with the lpr protocol and connect to the
Fiery EXP4110 over a TCP/IP network, you can print directly to the Fiery EXP4110.
• Setting up UNIX workstations requires an administrator with root privileges. After the
initial configuration, UNIX users submit print jobs to a named printer.
• The Fiery EXP4110 is a printer controller that understands lpr protocols.
• The Fiery EXP4110 has a remote printer name you must use in order to communicate with
it successfully.
Regardless of the UNIX system you use, the name you use for the remote printer (or
rp
in
the /etc/printcap file) in configuring the network for the Fiery EXP4110 must be one of
the following
:
print
hold
direct
Workstations on a TCP/IP network can print directly to the Fiery EXP4110 as a remote
printer, or can print to a Windows 2000/Server 2003 server or UNIX workstation acting
as a print server.