49
The document sent to the printer does not
print
Cause
Suggested Solution
The printer cable is not
connected properly.
Unplug the power source. Make
sure the printer cable is securely
connected to the printer and your
PC. Reconnect the power source.
The printer is not mapped to the
local port.
Map the printer to LPT1. Use the
Details property page to map the
LPT printer port. Click the Start
button, point to Settings, and
click Printers. Click the Xerox
DocuPrint C8 icon with the right
mouse button, then click
Properties. Click the Details tab,
and check the Print to the
following port. The printer port
is usually LPT1.
The printer cable is incorrect.
Use an IEEE 1284 compliant
parallel printer cable.
The printer cable is damaged.
Check the printer cable and
replace if damaged.
The type of interface is incorrect.
Verify that the computer is using
the parallel interface. Check your
Windows software manual to
ensure that your operating
system software communicates
to the interface port that your
printer is connected to.
The front panel LED is blinking
intermittently.
Press and release the Printer
Control (green) button to
continue printing.
