Xerox Fiery EXP4110, Configuration And Setup

Page: 9 / 108

C
ONNECTING TO THE
N
ETWORK
9
C
ONNECTING TO THE
N
ETWORK
This chapter summarizes the stages in setting up the Fiery EXP4110.
Fiery EXP4110 on the network
When the Fiery EXP4110 is connected to a network, it behaves as a networked PCL or
PostScript printer. The Fiery EXP4110 supports the following network protocols (rules
that enable computers on a network to communicate with each other):
• AppleTalk
• TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP, IMAP, IPP, LDAP,
LPD, NBT, POP3, Port 9100, SMB, SMTP, and SNMP protocols
• IPX/SPX (Novell)
These protocols can run concurrently on the same cable. Computers that use other protocols
can print through a server that uses one of the supported protocols. The Fiery EXP4110 is
auto-sensing, and handles all connections simultaneously.