Xerox Fiery EXP4110, Configuration And Setup

Page: 83 / 108

A
DMINISTERING THE
F
IERY
EXP4110 83
3 Click OK.
The new password, Fiery.2, is now set.
Updating system software
The Fiery EXP4110 uses unique system software to receive and process jobs and send job data
to the printer. Resident on the Fiery EXP4110, system software processes and controls the
spooling, rasterizing, and printing of jobs, as well as job accounting (the Job Log), storage,
and retrieval.
You can check for system software updates from a secure site on the Internet. Updates to user
software may also be available.
Although the Fiery EXP4110 system software is based on another operating system (such as
Windows or UNIX), do not install third-party updates such as Microsoft Hot Fixes unless
your authorized support center recommends that you do so.
T
O CHECK FOR SOFTWARE UPDATES FROM
W
EB
T
OOLS
1 Start the Configure WebTool.
2 Click Launch Configure.
3 Type the Administrator password and click OK.
4 Click Server > System Update.
5 Select Enable Automatic Update and choose a method for updating the Fiery EXP4110:
• Notify when updates are available.
• Download updates and notify.
• Install updates, which allows you to download and install updates on the Print Server.
Specify the Day and Time to restart the Print Server automatically after the updates
are downloaded.
6 If you use a proxy server to connect through a firewall to the Update server, select Enable
Proxy and enter the appropriate information:
•
Address:
Proxy server IP address
•
Port:
Port used by the proxy server
•
User:
User name for accessing the proxy server
•
Password:
Password for accessing the proxy server