Xerox Fiery EXP4110, Configuration And Setup

Page: 10 / 108

C
ONNECTING TO THE
N
ETWORK
10
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
1 Configuring the network environment
Configure network servers to provide users with access to the Fiery EXP4110 as a networked
printer. For information about configuring network servers in Windows and UNIX network
environments as they relate specifically to the Fiery EXP4110, see
page 12 . For information
about using your network, see the documentation that accompanies your network system.
2 Physically connecting the Fiery EXP4110 to a functioning network
Prepare a network node for the Fiery EXP4110. Obtain cable, route it to the location where
the Fiery EXP4110 is to be installed (near the printer), and attach the cable to the network
connector of the Fiery EXP4110. For details, see
page 20 .
3 Setting up the Fiery EXP4110
Configure the Fiery EXP4110 for your printing and network environment (see Setting up the
Fiery EXP4110 from the Control Panel ).
4 Preparing user computers for printing
Install the files needed for printing, install user software, and connect the user computers to
the network. The software installation is described in
Printing from Windows and Printing
from Mac OS .
5 Administering the Fiery EXP4110
Monitor and maintain system performance and troubleshoot problems that may arise
(see
Administering the Fiery EXP4110 ).