Xerox FaxCentre F110, Service Manual

Page: 17 / 204

Status Indicator RAPs
FaxCentre F110 12/04 2-5
Table 3: Printer Display Messages
Message on Display Message
Type Description Service Action (When the
operator action fails)
CLOSE PRINTER
COVER STATUS CLOSE PRINTER
COVER Check the sensor, refer to GP
10 . Install a new cover, PL 9
or a new main PWB, PL 6 .
PAPER EMPTY
REFILL PAPER STATUS REFILL PAPER CAS-
SETTE Check the sensor, refer to GP
10 . Install an actuator, PL 8 or
a new PSU, PL 8 .
PAPER JAM
REMOVE PAPER ERROR PAPER-INPUT JAM Install a new actuator, PL 8 or
a new PSU, PL 8 .
PAPER JAM NB 2
REMOVE PAPER ERROR PAPER-CENTER JAM Install a new actuator, PL 8 or
a new PSU, PL 8 .
PAPER JAM NB 3
REMOVE PAPER ERROR PAPER-EXIT JAM Install a new actuator, PL 8 or
a new PSU, PL 8 .
PAPER FEED
REPLACE PAPER ERROR PAPER MISS FEED-
ING Install a new actuator, PL 8 or
a new PSU, PL 8 .
CHECK PRINTER: 01
RESET DEVICE ERROR FUSER TEMPERA-
TURE TOO HIGH Install a new thermistor, PL 5
or a new fuser, PL 5 .
CHECK PRINTER: 02
RESET DEVICE ERROR FUSER TEMPERA-
TURE TOO LOW Go to 3 Check Printer Device
02 RAP .
CHECK PRINTER: 04
RESET DEVICE ERROR POLYGON-MOTOR
ERROR Go to 4 Check printer device
04 RAP .
CHECK PRINTER: 05
RESET DEVICE ERROR SYNCRONISATION OF
LASERBEAM FAILED Install a new LSU, PL 3 .
PAPER SIZE
REPLACE PAPER ERROR WRONG PAPER SIZE Install a new actuator, PL 8 or
a new PSU, PL 8 .
HEATING
PLEASE WAIT STATUS Install a new thermistor, PL 5
or a new fuser, PL 5 .
INSERT TONER
TONER LOW STATUS REPLACE TONER Install a new print cartridge,
GP 3 , PL 12 .