Xerox EC70, User Manual

Page: 147 / 182

A full declaration of conformity, defining the relevant directives and referenced standards,
can be obtained from your authorized local dealer.
WARNING: Changes or modifications to this equipment not specifically approved by the Xerox
Corporation may void the user's authority to operate this equipment.
External radiation from Industrial, Scientific, and Medical (ISM) equipment can interfere with
the operation of this Xerox
® device. If external radiation from ISM equipment interferes this
device, contact your Xerox ® representative for assistance.
This is a class A product. In a domestic environment, this product can cause radio frequency
interference, in which case the user can be required to take adequate measures.
Shielded cables must be used with this equipment to maintain compliance with Council
Directive 2004/108/EC.
EEuurrooppeeaann U Unniioonn LLoott 44 IIm maaggiinngg EEqquuiippm meenntt
A Aggrreeeem meenntt EEnnvviirroonnm meennttaall IInnffoorrm maattiioonn
EEnnvviirroonnm meennttaall IInnffoorrm maattiioonn PPrroovviiddiinngg EEnnvviirroonnm meennttaall SSoolluuttiioonnss aanndd
RReedduucciinngg C Coosstt
The following information has been developed to assist users and has been issued in relation to the
European Union (EU) Energy Related Products Directive, specifically the Lot 4 study on Imaging
Equipment. This requires manufacturers to improve environmental performance of in scope products
and supports the EU action plan on energy efficiency.
In scope products are Household and Office equipment that meet the following criteria:
• Standard monochrome format products with a maximum speed less than 66 A4 images per
minute.
• Standard color format products with a maximum speed less than 51 A4 images per minute
Environmental Benefits of Duplex Printing
Most Xerox ® printers have duplex printing, also known as 2-sided printing, capability. Duplex printing
enables you to print on both sides of the paper automatically, and therefore helps to reduce the use
of valuable resources by reducing your paper consumption. The Lot 4 Imaging Equipment agreement
requires that, on models greater than or equal to 40-ppm color or greater than or equal to 45-ppm
black and white, the duplex function is enabled automatically during setup and print driver
installation. Some Xerox
® models below these speed bands can have 2-sided printing enabled by
default at the time of installation. If you continue to use the duplex function, it reduces the
environmental impact of your work. However, if you require 1-sided printing, you can change the print
settings in the print driver.
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight
paper (60 g/m
2 ), which contains less raw material and thus save resources per print, can be used in
certain applications. We encourage you to check if this is suitable for your printing needs.
Xerox ® EC70 Color Copier/Printer
User Guide
147
Regulatory Information