Xerox EC70, User Manual

Page: 125 / 182

6. If the document cannot be found, raise the Document Feeder slowly.
7. Gently return the Document Feeder Tray to its original position.
C Clleeaarriinngg PPaappeerr JJaam mss iinn tthhee H Hiigghh C Caappaacciittyy FFeeeeddeerr
1. Open Tray 6 and remove any jammed paper.
2. If paper is torn, check for any torn pieces of paper inside the machine.
3. Gently close Tray 6.
4. Gently move Tray 6 to the left until it stops.
5. Open the Tray 6 top cover and remove any jammed paper.
6. Close the Tray 6 top cover and gently move Tray 6 to its original position.
C Clleeaarriinngg PPaappeerr JJaam mss iinn tthhee O Ovveerrssiizzeedd H Hiigghh C Caappaacciittyy FFeeeeddeerr
1. Open the tray where the paper jam occurred.
2. Remove the visible jammed paper.
3. If paper is torn, check for any torn pieces of paper inside the machine.
4. Gently close the tray.
C Clleeaarriinngg PPaappeerr JJaam mss iinn tthhee FFuusseerr
1. Open the bottom-right cover and tear off the Lead Edge from any jammed sheet. Also, clear any
jammed sheets from the Tray 5 (Bypass) feeder. Then, open the front cover.
2. Turn Handle 2 to the right until it is in the horizontal position, then pull out the Transfer Module.
Note: Never touch a labeled area, found on the fuser or nearby, indicating High
Temperature and Caution. You might get burnt.
3. Remove the visible jammed paper.
4. If paper is torn, check for any torn pieces of paper inside the machine.
5. Move Handle 2a to the right and remove any jammed paper.
6. Pull down Handle 2b and remove the jammed paper.
7. Return Handle 2a and Handle 2b to their original position.
8. Push in the Transfer Module completely and turn Handle 2 to the left.
9. Close the front cover.
C Clleeaarriinngg JJaam mss iinn tthhee C C//ZZ FFoollddeerr
C Clleeaarriinngg JJaam mss aatt 22aa iinn tthhee C C//ZZ FFoollddeerr
To clear jams at 2a in the C/Z Folder:
Xerox ® EC70 Color Copier/Printer
User Guide
125
Troubleshooting