Xerox DocuPrint N3225, System Administrator Manual

Page: 100 / 325

Using the Menu System
1-92
❖
System Administrator Guide
PServer Name
Set the name of the PServer in this
printer (a name of 2 to 47 characters
in length). The available values are:
A - Z, 0 - 9, hyphen (-),underscore (_)
XRX_<macaddress>*
For this item (after Step 3), Item
Up moves the cursor to the right
through the displayed PServer name
and
Item Down moves the cursor
to the left. This allows you to change
characters within the string rather
than having to re-enter the entire
string.
With the cursor displayed under a
character,
Value Up increments
the value of that character and
Value
Down decrements the value.
From any cursor position, you
can null out (delete) to the end
of the string by selecting the
space character with
Value
Up or Value Down and
then pressing Enter .
1. Press Menu Up or Menu
Down until you see:
Menus
Novell Menu
2. Press Item Up or Item
Down
until you see:
Novell Menu
PServer Name
3. Press Value Up or Value
Down
. You will see:
P S e r v e r N a m e =
xxx...xxx
4. Press Value Up or Value
Down to change the value
of the character above the
cursor. The value is
incremented or decremented
by 1 each time the key is
pressed. Holding down
Value
Up or Value Down
causes continuous scrolling
through the values.
P S e r v e r N a m e =
xxx...xxx
5. To change other characters in
the PServer name, press
Item
Up or Item Down to
scroll right or left respectively
through the character string,
then press
Value Up or
Value Down to change the
value of the character above
the cursor (as in Step 4).
P S e r v e r N a m e =
xxx...xxx
6. When you have completed
setting the PServer Name,
press
Enter
. You will see:
Novell Menu
PServer Name
7. Press On Line . You will see:
Ready
Table 1.26 Novell Menu functions (continued)
Menu Item and Function Keystrokes Display
Table 1.26 Page 4 of 7