Xerox DocuPrint M205 b, User Manual, Page: 204 / 454

203 Copying
„ Sharpness
You can adjust the sharpness to make the copy sharper or softer than the original.
1
For the DocuPrint M205 f/M205 fw, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document
cover.
For the DocuPrint M205 b, place a single document face down on the document glass, and close
the document cover.
See also:
• "Making Copies From the ADF (DocuPrint M205 f/M205 fw Only)" on page 194
• "Making Copies From the Document Glass" on page 192
2
Press the ( Copy ) button.
3
Select
Sharpness
, and then press the button.
4
Select the desired setting, and then press the button.
NOTE:
• Value marked by an asterisk (*) is the factory default menu settings.
5
If necessary, customize the copy settings including the number of copies, copy size, and image
quality.
See also:
• "Setting Copy Options" on page 195
6
Press the ( Start ) button to begin copying.
Sharpest Makes the copy sharper than the original.
Sharper
Normal*
Does not make the copy sharper or softer than the original.
Softer Makes the copy softer than the original.
Softest