Basic Copying
6-2
Basic Copying
Use either the document glass or the document feeder to make copies. Load the originals to be copied and
follow the steps below to make copies. To clear the settings from the previous job, press the
Clear All
button once.
1.
On the printer console, press the
Copy
button.
2.
Enter the desired number of copies using the printer console keypad. The number of copies appears on
the upper, right corner of the display. To reset the number of copies to 1, press the
Clear All
button.
3.
Set copying options. See
4.
Press the
Start
button.
If you placed originals in the document feeder, copying continues until the document feeder is empty.
Note:
Copying cannot be made while printing.
Document Glass
Lift the document feeder or the document glass cover,
and then place the original
face down
on the
back
,
left
corner of the document glass. Gently close the
cover.
Document Feeder
Insert originals
face up
with the
top
of the page
entering the feeder first. Adjust the paper guides so
they fit against the originals.
