Installing the Scan Driver
7-3
Installing the Scan Driver
If you plan to import scanned images directly into an application (such as Photoshop or Word), or scan
images directly to your computer, you must install a scan driver.
Installing the Scan Driver (Windows)
To install the scan driver from the
Software Pack CD-ROM
:
1.
Turn off the printer.
2.
Connect the computer and C1190 FS with a USB cable.
3.
Turn on the printer.
If a setup screen requests for you to specify the driver's location while new hardware is being detected,
insert the Software Pack CD-ROM into the computer's CD-ROM drive.
Found New Hardware
Wizard
is displayed.
Note:
If the Driver CD Kit screen starts, press the
Exit
button to close the screen.
4.
Specify by following the example below where the driver to be stored. Never select
Search for a
suitable driver for my device (recommended)
.
■
“(CD-ROM drive name):\Common\Scan”
5.
Continue the procedure according to the instructions of the installer.
6.
Confirm that the icon for C1190 FS is displayed on the
Scanners and Cameras
screen.
The method of displaying the
Scanners and Cameras
screen differs depending on the OS, as
described below.
■
Windows 2000
: Select
Start
>
Settings
>
Control Panel
>
Scanner and Cameras
.
■
Windows XP
: Select
Start
>
Control Panel
>
Printers and Other Hardware
>
Scanner and
Cameras
.
■
Windows Server 2003
: Select
Start
>
Control Panel
>
Scanner and Cameras
.
■
Windows Server 2008
: Select
Start
>
Control Panel
>
Hardware and Sound
>
Scanner and
Cameras
.
■
Windows Vista
: Select
Start
>
Control Panel
>
Hardware and Sound
>
Scanner and
Cameras
.
If the icon for C1190 FS is displayed, installation of the scan driver is completed.
If the icon is not displayed, execute the procedure again from Step 1.
See also:
