Xerox DocuPrint 4890, Manual, Page: 52 / 76

Inks
5-12 Guide to Performing Routine Maintenance
8. Push down firmly on the cart pedal until you hear or feel a
click. If the pallet does not drop, check that the CCU is all the
way in the printer and the pallet is released, then push down
on the pedal again.
9. Remove the cart from the printer and close the cart top cover.
10. Close the printer doors.
11. Store the cart.
Storing the cart and CCU
NOTE: If any dry ink gets on your hands, wash them with soap
and cold water. Heat sets the ink permanently. If any dry ink gets
on your clothes, brush them with a dry paper towel or a stiff-
bristled brush. If this does not remove the ink immediately,
launder with detergent and cold water. Tell the dry cleaners that
the spot is dry ink for a printer, so they will not use a solvent that
sets the stain.
When you are not using a cart and CCU, store them in a dry,
dust-free area that has little variation in temperature and
humidity. The storage area should have a similar temperature
and humidity to the printer room. Maintain the temperature in the
range of 60 to 80° F/15 to 26° C and a relative humidity of 30 to
65 percent.