Xerox Document WorkCentre 480cx Page 232 User Manual Download

Page: 232 / 318

7-10

Troubleshooting

LOAD DOCUMENT

You have attempted to
set up a sending
operation without
loading a document.

Load a document and
try again.

MEMORY FULL!

The machine’s memory
is full.

•

Delete unnecessary
documents.

•

Retransmit after
more memory
becomes available.

•

Split the
transmission into
more than one
operation.

NO ANSWER!

The remote machine has
not answered and all
redial attempts have
been made.

Try again. Make sure
the remote machine is
operational.

NO. NOT ASSIGNED

The One-Touch or
Speed Dial location you
tried to use has no
number assigned to it.

•

Dial the number
manually with the
numeric keypad.

•

Assign the number
to a One-Touch or
Speed Dial button
and try again.

LCD Display

Meaning

Solution

Print the 480cx User Guide

Summary of Contents for Document WorkCentre 480cx































































































































































































































































































































Search results

Summary of Contents for Document WorkCentre 480cx

Reviews:

Related manuals for Document WorkCentre 480cx

Brands by name

Popular brands

Xerox Document WorkCentre 480cx, User Manual

Search results

Summary of Contents for Document WorkCentre 480cx

Reviews:

Related manuals for Document WorkCentre 480cx

Brands by name

Popular brands