Xerox document centre285 series, User Manual

Page: 94 / 209

4.3 Configuring the Printer Drivers
82
Installing/Configuring the P
rinter
D
ri
v
ers
4
● Finisher Tray Upper
(available only if Bypass Tray has not been selected for Paper Source on the Paper/
Output tab)
●
Finisher Tray Lower
(Finisher Tray Upper and Finisher Tray Lower are available only if Finisher has been
selected for Paper Output Options on the Printer tab)
●
Side Output Tray
Printouts are delivered face up.
(available only if Side Output Tray has been selected for Paper Output Options on the
Printer tab)
Paper of the following paper sizes, even if selected, will not be output to to Finisher Tray Upper or
Finisher Tray Lower: postcard, A6, B6, custom paper size.
Image Orientation
Select the orientation of the image when printed. Options include:
● Portrait (default)
Portrait means the page is printed with the height of the image greater than the width.
Whe you view a page that is printed with a portrait orientation, you hold it with the long
edges to the sides.
●
Landscape
Landscape means the page is printed with the width of the image greater than the
height. Whe you view a page that is printed with a landscape orientation, you hold it with
the short edges to the sides.
2 Sided Print
Select whether you want to print on one or both sides of the paper. If you are printing on both
sides, you have to decide whether to align to the long or short edge of the paper. Options
include:
●
1 Sided Print (default)
Prints only on one page.
●
Flip on Long Edge
Two-sided printing aligned to the long edge of the paper.
●
Flip on Short Edge
Two-sided printing aligned to the short edge of the paper.
Two-sided print options are available only if all of the following conditions are met:
- Duplex Module has been selected on the Printer tab;
- Bypass Tray has not been selected for Paper Source on the Paper/Output tab.
Paper Type (Bypass Tray)
Select the type of paper or media for the bypass tray. Options include:
● Plain (default)
●
Heavyweight
● Transparency
Enabled only if Bypass Tray has been selected for Paper Source Options on the Printer
tab.
Restore Defaults
Restore the settings in the dialog box to their default values.