Xerox document centre285 series, User Manual, Page: 77 / 209

Installing/Configuring the P
rinter
D
ri
v
ers
65
4
4.2
Installing/Uninstalling the
Printer Drivers
This section describes the procedure for installing and uninstalling the printer drivers.
Two methods of installation are described here, one for a local printer and the other for a network
printer.
If you have installed an earlier version of the printer driver, uninstall it first by following the procedure
in "4.2.3 Uninstalling the printer drivers" before installing the new version.
You can also use the Add Printer Wizard to install the printer driver. Refer to ReadMe for more details.
4.2.1 For a local printer
Local printer refers to a printer that is directly connected to your computer.
Procedure
Start Windows 95, Windows 98, Windows Me, Windows NT 4.0 or Windows 2000.
For this example, we will install the DC285 PCL 6 printer driver on the Windows 98 OS.
Click Start and select Run.
The Run dialog box appears.
Insert in the PCL Driver/Network Utility (Windows

) CD-ROM and enter
"E:\English\DC285\Win9x_Me\PCL6\Setup\Setup.exe" on the Run dialog box.
Then click OK.
● For this example, we assume that drive E is the CD-ROM drive. Enter the appropriate letter for your
CD-ROM drive.
●
Enter "DC235" instead of "DC285" if you are installing the DC235 printer driver.
The End User Licence Agreement dialog box appears. Read through the licence agreement
carefully. If you have no objections to it, click on the checkbox, I accept the terms of the
above Licence Agreement, and then click Next.