Xerox document centre285 series, User Manual

Page: 102 / 209

4.3 Configuring the Printer Drivers
90
Installing/Configuring the P
rinter
D
ri
v
ers
4
Layout
The Layout property provides six job finishing features for you to modify the printed layout of a
document. Notice that an image is displayed for each type of layout mode selected and which
also indicates the current page orientation.
Layout Mode
Provides a list of the job finishing options:
●
Multi-Up (default)
●
Booklet Creation
(available only if Duplex Module has been selected on the Printer tab)
● Fit To Output Size
●
Zoom
●
Change Output Size (No Zoom)
● Poster
Selecting each of the features will display one of the following corresponding options:
(1) Multi-Up
(available when Multi-Up has been selected for Layout Mode)
The Multi-Up function allows more than one page to be printed on the
same paper.
Pages Per Sheet (default: 1)
Lists the possible pages per sheet for the Multi-Up printing function: 1, 2, 4, 6, 9, 16.
Page Border
To provide options of printing each document page with a page border:
●
None (default)
Border is not applied.
●
Grid
A rectangle is drawn to divide each document page on the paper output.
●
Shadow
A rectangle with drop shadow effect is drawn around each document page.
Enabled when more than 1 has been selected for Pages Per Sheet.