Xerox Document Centre 470cx Online User'S Manual Download Page 234

Page: 234 / 328

Book

TOC

Chapter

TOC

Search

7-14

POLLING ERROR

• The remote fax

machine you want
to poll is not ready
to respond to your
poll.

• When setting up to

poll another fax
machine, you have
used an incorrect
poll code.

• The remote operator

should know in
advance that you
are polling and
have their fax unit
loaded with the
original document.

• Enter the correct

poll code.

POWER FAILURE

A power failure
occurred.

If there are documents
stored in memory, a
Power Failure Report
will be printed
automatically when
the power is restored.

LCD Display

Meaning

Solution

Summary of Contents for Document Centre 470cx









































































































































































































































































































































Search results

Summary of Contents for Document Centre 470cx

Reviews:

Xerox Document Centre 470cx, Online User'S Manual, Page: 234 / 328

Search results

Summary of Contents for Document Centre 470cx

Reviews: