Xerox document centre 235 series, User Manual

Page: 55 / 209

Useful Operations
43
3
3.2
Printing vs Copying
3.2.1 Control panel operations during printing
The touch panel display of the control panel (not printer control panel) during printing will be as
follows:
The operations that can be done on this control panel during printing are as follows
3.2.2 Printing and copying functions
The relationship between the printing and copying functions is explained below.
Auto Tray Switch
Auto Tray Switch refers to the feature of automatically sending paper from another tray with the
same size/orientation as the paper in the tray which has run out of paper.
This feature will usually be activated when Auto has been selected for Paper Source on the
Paper/Output tab of the printer properties dialog box. This feature is independent of the
copying function setting.
Control panel operations Printer actions
Press Close on the screen displayed
above to start copying. You can program the next operation without disrupting
the current printing.
Press Interrupt during printing. Printing will be paused and you can use the copying
functions. Press Interrupt again to exit the Interrupt
mode and resume printing.
Press Job Status Stop, select a print
job, and press Stop.
Printing will be paused and the copying functions can
be used. The paused printing will resume automatically.
The print job cannot be stopped using the control
panel.
Printer
Printing in progress...
Close