Xerox document centre 235 series, User Manual

Page: 105 / 209

4.3 Configuring the Printer Drivers
93
Installing/Configuring the P
rinter
D
ri
v
ers
4
Output Size (default: A4
(210×297 mm)
)
Lists the possible paper sizes that can be used. The options available for the paper size
are similar to the settings of Paper Size on the Paper/Output tab.
Page Position
Specify the position where the document page is to be printed on the output:
● Top Left
● Top Right
●
Center (default)
● Bottom Left
● Bottom Right
Page Border
To provide options of printing each document page with a page border:
● None (default)
Border is not applied.
●
Shadow
A rectangle with drop shadow effect is drawn around each document page.
(6) Poster
(available when Poster has been selected for Layout Mode)
This feature allows you to enlarge proportionally and print the image of
each document across multiple pages.
Depending on the paper size to be used and the image size to be output, you may not be able to carry
out printing. When this happens, reduce either the paper size or image size, and then print again.
Style
Select the number of times of its page size to enlarge or a zoom % (under Custom) to
define the style:
● 2 x 2 (default)
●
3 x 3
●
4 x 4
● Custom
Overlap (default: 100)
Define the overlapped width between each enlarged image across different page. The
width can be set between 0 - 150 dots.
Page Position
Select the position where the document page is to be printed on the output:
●
Top Left
●
Top Right
● Center (default)
● Bottom Left
●
Bottom Right