background image

 

Customer Release Notes

DocuColor Server, system software version 1.0
for Xerox digital copier printers

 

Part number: 10016501

 

These notes contain information about the DocuColor Server that was not available when 
the customer documentation was printed. Prior to using the DocuColor, please read these 
release notes and distribute them to all DocuColor users.

Write your support phone number here for reference.

 

Power cycling the DocuColor

 

When you power on, you should first turn on the copier and then turn on the DocuColor.

If you need to power cycle (power off and then back on) either the copier or the 
DocuColor, make sure that the DocuColor is either Idle or flashing red. 

After power cycling the DocuColor several times, the System Time and System Date may 
be incorrect. Reset them in Control Panel Setup.

 

Terminating the DocuColor

 

You must use the terminator included with your DocuColor as follows:

• If the DocuColor is not connected to a CD-ROM drive, terminate the SCSI port on the 

server.

• If there is a CD-ROM drive connected to the DocuColor, terminate the open SCSI port 

on the CD-ROM drive.

 

Control Panel Setup

 

The first time you set up the DocuColor from the Control Panel, you must do Server, 
Network, and Printer Setup in that order. If you later change information in one of the 
Setups, you must open the other Setup menus to make sure that changes take effect 
properly—even if you do not need to change any settings.

 

Language Setup

 

If you want to change the language in which messages appear after your initial language 
selection, you must reinstall system software.

Messages on the Control Panel appear in English until you select a language. In addition, 
no matter what language you select, messages and menus for the Format Disk and Install 
Software commands always appear in English. 

 

Unexpected printing results

 

Corrupted job files sent to the DocuColor may cause unexpected printing results. If this 
happens, power cycle the DocuColor. If problems persist, use the Clear Server command 
from the Control Panel. See the 

 

User Guide

 

 for details.

DocuColor 
Color Server

Reviews: