![background image](http://html2.mh-extra.com/html/xerox/docucolor-3535/docucolor-3535_installation-manual_3654812097.webp)
2
2-17
Installing Fiery software and fonts
Modifying the configuration
Edit the configuration whenever there is any change to your Fiery or network, such as
an IP address or device change. Change the specific Fiery Setup information before
configuring the connection.
T
O
MODIFY
THE
CONFIGURATION
1.
In the Chooser dialog box, click Option.
2.
To edit information for a Fiery, select the Fiery by its IP address or DNS name and click
Modify. Edit information in the Settings dialog box as necessary, and click OK.
3.
To add a new Fiery, click Add. Configure the Settings dialog box as outlined in steps
through
in the preceding procedure.
4.
To remove a Fiery, select the Fiery by its IP address or DNS name, and click Remove.
The list of available servers reflects the modifications you have made.
Configuring a connection for Fiery Downloader
When you start Fiery Downloader, you must specify the connection to the Fiery.
B
EFORE
YOU
BEGIN
•
Print the Configuration page from the Control Panel and note the AppleTalk
zone of the Fiery.