Xerox DocuColor 3535, Color Manual, Page: 42 / 108

2
2-6 Color Calibration
Using Calibrator
ColorWise Pro Tools Calibrator allows you to calibrate the Fiery using the
measurement method of your choice.
Changing the calibration has the potential to affect all jobs for all users, so consider
limiting the number of people authorized to perform calibration. Set an Administrator
password to control access to calibration (see the
Configuration Guide ).
N
OTE
:
Multiple users can be connected to one Fiery with ColorWise Pro Tools, but
only one user at a time can use Calibrator. An error message appears if you try to
calibrate when another user is using ColorWise Pro Tools to calibrate.
Starting Calibrator
Start Calibrator from the ColorWise Pro Tools main window.
T
O
C
ALIBRATE THE
F
IERY USING
C
ALIBRATOR
1. Start ColorWise Pro Tools and connect to the Fiery.
For instructions on configuring the connection to the Fiery, see the User Software
Installation Guide .
N
OTE
:
If the connection to the Fiery from Command WorkStation (which also allows
for access to ColorWise Pro Tools) is not established, you can start ColorWise Pro
Tools independently of Command WorkStation.
2. Click Calibrator.