Xerox DocuCentre SC2020 Page 237 User Manual Download

Page: 237 / 322

Xerox

DocuCentre

SC2020

User Guide

234

Job Status

This chapter describes how to check the status of current or pending jobs, and how to cancel jobs.

Note:

Some settings cannot be displayed when the Fax Kit (optional) is not installed. For more

information, contact our Customer Support Center.

Checking Current/Pending Jobs

You can check the status of the following current or pending jobs:
•

Current print, scan or fax job

•

Pending print jobs

•

Pending fax jobs to send

Note:

Completed jobs are not displayed.

Press the <Job Status> button.

Used to check the jobs.

Checking Reserved Fax Jobs

If any outgoing faxes have been reserved, you can check them by selecting [Fax Job (Waiting to Send)].
1.

Press the <Job Status> button.

Select [Fax Job (Waiting to Send)].

The list of reserved fax jobs appears.

Services Home

Job Status

Machine Status

<Job Status> button

Summary of Contents for DocuCentre SC2020



































































































































































































































































































































Search results

Summary of Contents for DocuCentre SC2020

Reviews:

Related manuals for DocuCentre SC2020

Brands by name

Popular brands

Xerox DocuCentre SC2020, User Manual

Search results

Summary of Contents for DocuCentre SC2020

Reviews:

Related manuals for DocuCentre SC2020

Brands by name

Popular brands