background image

Before Using the Device

Xerox

® 

DocuCentre

® 

SC2020

User Guide

20

Environment

For environmental protection and efficient use of resources, Xerox reuses returned toner cartridges, 
waste toner bottles and drum cartridges to make recycle parts, recycle materials or energy recovery.

Proper disposal is required for toner cartridges, waste toner bottles and drum cartridges no longer 
needed. Do not open toner cartridges, waste toner bottles and drum cartridges. Return them to your 
local Xerox representative.

About License

This section describes information about licenses. Be sure to read through it.

JPEG Code

Our printer software uses some of the codes defined by the Independent JPEG Group.

Libcurl

COPYRIGHT AND PERMISSION NOTICE

Copyright

©

 1996–2006, Daniel Stenberg, <[email protected]>.

All rights reserved.

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby 
granted, provided that the above copyright notice and this permission notice appear in all copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, 
INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE 
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN 
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or 
otherwise to promote the sale, use or other dealings in this Software without prior written authorization of 
the copyright holder.

FreeBSD

This product contains the part of FreeBSD codes.

The FreeBSD Copyright 

Copyright 1994-2006 The FreeBSD Project. All rights reserved. 

Summary of Contents for DocuCentre SC2020



































































































































































































































































































































Reviews: