Xerox DocuCentre SC2020, User Manual

Page: 162 / 322

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
159
Values:
Denotes region-specific factory default values.
The device sets the amount of space between each line (vertical line spacing) based on the [Form Line] and
[Orientation] menu items. Select the correct [Form Line] and [Orientation] before changing [Form Line].
For more information, refer to Orientation on page 156.
Quantity
Purpose: To set the default print quantity, within the range of 1 to 999. The default is 1. (Set the number of
copies required for a specific job from the print driver. Values selected from the print driver always override
values selected from the control panel.)
Image Enhance
Purpose: To specify whether to enable the Image Enhance feature, which makes the boundary line
between black and white smoother to decrease jagged edges and enhance the visual appearance.
Values:
Hex Dump
Purpose: To help isolate the source of a print job problem. With [Hex Dump] selected, all data sent to the
device is printed in hexadecimal and character representation. Control codes are not executed.
Values:
Draft Mode
Purpose: To save toner by printing in the draft mode. The print quality is reduced when you print in the
draft mode.
64
*
(mm series)/
60
*
(inch series)
Sets the value in increments of 1.
5–128
Off Disables the Image Enhance feature.
On Enables the Image Enhance feature.
Disable Disables the Hex Dump feature.
Enable Enables the Hex Dump feature.