Xerox DocuCentre SC2020, User Manual

Page: 155 / 322

Xerox
®
DocuCentre
®
SC2020
User Guide
152
9
Tools
Each function is set to the factory default (initial) settings, but you can customize these settings to match
your operating environment. You can change the settings in [Tools].
Note: Some settings cannot be displayed on some models. An optional component is required. For
more information, contact our Customer Support Center.
This chapter describes the functions you can make settings changes for.
Understanding the Device Menus
When the device is connected to a network and available to a number of users, the access to the [Admin
Settings] can be limited. This prevents other users from using the control panel to inadvertently change a
user default that has been set by the administrator.
However, you can use your print driver to override user defaults and select settings for individual print jobs.
Report/List
Use the [Report/List] menu to print various types of reports and lists.
Note: The reports and lists with an asterisk can be printed only when the Fax Kit (optional) is installed.
System Settings
Purpose: To print a list of the current user default values, the installed options, the amount of installed print
memory, and the status of device supplies.
Panel Settings
Purpose: To print a detailed list of all the settings on the control panel menus.
PCL Fonts List
Purpose: To print a sample of the available PCL fonts.