Replacing Consumables
55
M
ai
n
te
na
nc
e
3
9
Remove the ring tag on the right-
hand side of the locking screw and
discard it.
10
Rotate the release lever counter-
clockwise to lock the unit into
position.
11
Close the front cover.
Note
•
Press firmly in the top center
when closing the cover. If an
error message appears on the
display, press the cover on the
right-hand side to close the
cover completely.
12
Select [Reset Counter] on the screen.
13
Select [Yes] on the screen to reset the counter.
Replacing the Staple Cartridge (for Finisher-A1)
When the Finisher-A1 (optional) is installed and it is time to replace the staple cartridge,
a message appears on the touch screen. When this message appears, load a new
staple case into the staple cartridge.
Important •
The use of staple cartridges not recommended by Fuji Xerox may impair quality and
performance. Use only staple cartridges recommended by Fuji Xerox for the machine.
Note
•
To order a staple cartridge, contact our Customer Support Center.
1
Make sure that the machine is not
operating, and open the front cover
of the finisher.
