1 Before Using the Machine
20
Before Usi
n
g the Mac
h
in
e
1
Customizing the Control Panel
Use the following procedure to select the screen to be displayed when the machine is
turned on or exited from the Energy Saver mode, to select the screen to be displayed
after Auto Clear, to assign features to <Custom> buttons, and to select the features to
be displayed on the [All Services] screen.
1
Press the <Log In/Out> button.
2
Enter the system administrator’s
user ID with the numeric keypad or
the keyboard displayed, and select
[Enter].
When a passcode is required,
select [Next Input] and enter the
system administrator’s passcode,
then select [Enter].
Note
•
The default user ID is "11111".
•
The default passcode is "x-admin".
3
Select [Tools].
4
Select [Screen/Button Settings].
5
Select the item to be set or
changed.
Setting the Initial Screen
Set the screen to be displayed after turning the machine on or exiting the Energy Saver
mode. This section describes how to set the [Send from Mailbox] screen as the initial
screen, as an example.
1
2
3
4
5
6
7
8
9
0
#
C
<Log In/Out>
button
