1
1-5
Using the Control Panel
Functions menu
You can choose the following commands from this menu:
Choose:
To do this:
Print Pages
Print special pages from the Fiery SI. You can print the
following pages from the submenu that appears:
Test Page
—A test page enables you to confirm that the
Fiery SI is properly connected to the copier and provides
color and grayscale samples to troubleshoot problems with
the copier or the Fiery SI. The following information is
listed: Server Name, Printer Model, Color Mode,
Calibration, Target, Color Rendering , and Date and Time
printed.
Configuration
—Prints the Configuration page, which
gives the current server and device configuration. This
page lists general information about the hardware and
software configuration of the Fiery SI, the current options
for all Setup settings, information about the current
calibration, and the ethernet and token ring addresses (if
applicable) of the Fiery SI.
Job Log
—Prints a log of the last 55 jobs. For information
on the fields in the Job Log and on printing it in other
forms, see “Using the Job Log” on page 5-22.
Control Panel Map—
Prints the Control Panel Map, which
is an overview of the screens you can access from the
Control Panel. For information about using these screens
to set up the Fiery SI, see the Administrator Guide.
Color Charts
—Prints samples of the RGB, CMY, and
PANTONE colors available from the Fiery SI.
Font List
—Prints a list of all fonts resident on the hard
disk.
Summary of Contents for Digital copier printers
Page 1: ...US ER G UI D E for Xerox digital copier printers Fiery SI Color Server...
Page 43: ...33 12 Printing with PC Compatible Computers 7 Click the Graphics tab...
Page 51: ...44 3 Scanning documents 6 Click Prescan The image appears on the left side of the window...
Page 104: ...66 26 Color Calibration The rest of the curve adjusts to match the endpoint...
