Xerox D95, System Administration Manual, Page: 88 / 250

Proxy server and port numbers
This section describes proxy server settings and port numbers when using this service.
Proxy server
We recommend that you use this service by connecting directly, and not using a proxy
server.
Note
If using a proxy server, specifying the IP address of the machine in the browser results
in slower responses and could prevent some screens from appearing. In this case, it is
necessary to configure the machine’s IP address on the browser-side without going
through a proxy server. Refer to the browser documentation for configuration instructions.
Port number
This service is configured to use port “80” by default. The port number can be changed
in Properties > Protocols > HTTP. Valid ports are 1 - 65535.
If you change the port to a value other than “80,” you must add “:” plus the port number
to the IP address when typing the URL into your browser.
For example, if the port number is “8080,” the URL is:
http://the IP address of the machine:8080
OR
http://the Internet address of the machine:8080
• You can verify the port number in Settings List > Maintenance.
• If communications are encrypted, you must specify an address that starts with “https”
instead of “http” to access CentreWare Internet Services.
E-mail print
You can send e-mail with TIFF or PDF documents attached from a computer to the
machine. Received e-mail is automatically printed. This feature is called “E-mail Print.”
Setup
To use the E-mail Print feature, the following setup is necessary.
Xerox ® D95/D110/D125/D136 Copier/Printer 7-4
System Administration Guide
Software applications and options