Xerox ColorQube 9201 Page 305 User Manual Download

Page: 305 / 331

Troubleshooting

ColorQube™ 9201/9202/9203

General Care and Troubleshooting

305

Dots on copies.

•

Reprint the job.

•

Make sure the defect is not on the original.

•

Clean the document glass and the Constant Velocity
Transport (CVT) glass.

Marks on the lead edge of paper stack which
are in line with the image.

•

Reprint the job.

•

Fix the image quality problems. Refer to

Image Quality

Problems

on page 301 for instructions.

•

Run 20 blank sheets through the device.

Oil in long edge feed (LEF) paper edges (at top
and bottom) after running long jobs of short
edge feed (SEF).

•

Reprint the job.

Tray 1 and 2 (or 3) raise failure.

•

Reprint the job.

•

Open and close the tray.

Tray 1 and 2 misfeed.

•

Reprint the job.

•

Check the tray side guides are tight against the stack of
paper. Turn or rotate the stack over if possible (unless
using media with a defined paper print side).

Problem

Potential Solution

Summary of Contents for ColorQube 9201












































































































































































































































































































































Search results

Summary of Contents for ColorQube 9201

Reviews:

Related manuals for ColorQube 9201

Brands by name

Popular brands

Xerox ColorQube 9201, User Manual

Search results

Summary of Contents for ColorQube 9201

Reviews:

Related manuals for ColorQube 9201

Brands by name

Popular brands