Xerox C8130 User Manual Download Page 235

Page: 235 / 420

Cleaning the Printer

C L E A N I N G T H E P R I N T E R E X T E R I O R

Regular cleaning keeps the touch screen, control panel, and exterior areas of the printer free from dust and dirt.

To clean the printer exterior:

To avoid activating buttons and menus when cleaning the printer, press the PPoow

weerr//W

Waakkee button, then touch

SSlleeeepp.

To remove fingerprints and smudges, clean the touch screen and control panel with a soft, lint-free cloth.

Note: There is a lint-free cloth stored in a compartment on the document feeder.

To return the printer to Ready mode, press the PPoow

weerr//W

Waakkee button.

Xerox

AltaLink

C8130/C8135/C8145/C8155/C8170 Series Color Multifunction Printer User Guide

235

Maintenance

Summary of Contents for C8130





































































































































































































































































































































































































































Search results

Summary of Contents for C8130

Reviews:

Brands by name

Popular brands

Xerox C8130, User Manual

Search results

Summary of Contents for C8130

Reviews:

Brands by name

Popular brands