Xerox C315, User Manual

Page: 36 / 376

Selecting a location for the printer
• Leave enough room to open trays, covers, and doors and to install hardware options.
• Set up the printer near an electrical outlet.
W Waarrnniinngg::
To avoid the risk of fire or electrical shock, connect the power cord to an appropriately
rated and properly grounded electrical outlet that is near the product and easily accessible.
C CA AU UTTIIO ON N— —SSH HO OC CKK H HA AZZA ARRD D::
To avoid the risk of electrical shock, do not place or use this
product near water or wet locations.
• Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
– Clean, dry, and free of dust
– Away from stray staples and paper clips
– Away from the direct airflow of air conditioners, heaters, or ventilators
– Free from direct sunlight and humidity extremes
• Observe the temperature range.
Operating temperature 10 to 32.2°C (50 to 90°F)
• Allow the following recommended amount of space around the printer for proper ventilation:
1. Top: 305 mm (12 in.)
2. Rear: 102 mm (4 in.)
3. Right side: 76 mm (3 in.)
4. Front: 508 mm (20 in.)
The minimum space needed in front of the
machine is 76 mm (3 in.).
5. Left side: 76 mm (3 in.)
36
Xerox
®
C315 Color Multifunction Printer User Guide
Set up, Install, and Configure