Xerox C315, User Manual

Page: 230 / 376

U S B
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
PPC CLL SSm maarrttSSw wiittcchh
Off
On*
Set the printer to switch to PCL emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
If PCL SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
PPSS SSm maarrttSSw wiittcchh
Off
On*
Set the printer to switch to PS emulation when a print
job received through a USB port requires it, regardless
of the default printer language.
If PS SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
JJoobb B Buuffffeerriinngg
Off*
On
Temporarily store jobs on the printer hard disk before
printing.
This menu item appears only when a hard disk
installed.
M Maacc B Biinnaarryy PPSS
On
Auto*
Off
Set the printer to process Macintosh binary PostScript
print jobs.
• When set to On, the printer processes raw binary
PostScript print jobs from computers using the
Macintosh operating system.
• When set to Auto, the printer processes print jobs
from computers using either Windows or Macintosh
operating systems
• When set to Off, the printer filters PostScript print
jobs using the standard protocol.
EEnnaabbllee U USSB B PPoorrtt
Off
On*
Enable the standard USB port.
Note: An asterisk (*) next to a value indicates the factory default setting.
230
Xerox
®
C315 Color Multifunction Printer User Guide
Use the Printer Menus