Xerox C310, User Manual

Page: 108 / 228

Menu item
Description
PS SmartSwitch
Off
On*
Set the printer to switch automatically to PS
emulation when a print job requires it, regardless of
the default printer language.
If PS SmartSwitch is off, then the printer does not
examine incoming data and uses the default printer
language specified in the Setup menu.
Job Buffering
Off
On*
Temporarily store jobs on the printer hard disk before
printing.
• This menu item appears only when a hard disk is
installed.
• This menu item appears only in some printer
models.
Mac Binary PS
Auto*
On
Off
Set the printer to process Macintosh binary PostScript
print jobs.
• On processes raw binary PostScript print jobs.
• Off filters print jobs using the standard protocol.
Energy Efficient Ethernet
Off
On*
Reduce power consumption when the printer does
not receive data from the Ethernet network.
TTC CPP//IIPP
Note: This menu appears only in network printers or printers attached to print servers.
Menu item
Description
Set Hostname Set the current TCP/IP host name.
Domain Name Set the domain name.
This menu item appears only in some printer models.
Allow DHCP/BOOTP to update NTP server
Off
On*
Allow the DHCP and BOOTP clients to update the
NTP settings of the printer.
Zero Configuration Name Specify a service name for the zero configuration
network.
This menu item appears only in some printer models.
Enable Auto IP
Off
On*
Assign an IP address automatically.
DNS Server Address Specify the current Domain Name System (DNS)
server address.
108
Xerox ® C310 Color Printer
User Guide
Use the Printer Menus