Xerox C3000, Facsimile Reference Manual

Page: 77 / 298

Specifying a Destination
67
1
Sending by IP-Fax
This section explains how to specify a destination using IP-Fax transmission.
When using IP-Fax transmission, specify the IP-Fax destination (IPv4 address,
host name, or alias telephone number) in place of the fax number.
Important
❒
Specify the protocol to be used in [ Select Line ] in advance.
A
Make sure that [ Fax ] is selected.
B
Press [ Manual Entry ] .
C
Enter the IP-Fax destination, and then press [ OK ] .
If you enter an incorrect character, press
[ Backspace ]
or
[ Delete All ]
. Then, re-
enter the characters correctly.
To change the IP-Fax destination after pressing
[ OK ]
, press
[ Edit Dest. ]
, re-enter
an IP-Fax destination, and then press [ OK ] .
To select a destination from the Address Book, see “Using the Address Book
to Specify Destinations”.