Xerox C3000, Facsimile Reference Manual

Page: 15 / 298

5
Reading the Display
This section explains how to use control panel and screen-displayed keys.
The display guides you through operations, shows messages, machine status,
and destinations registered in the destination lists.
If you press the
{
Facsimile
}
or
{
Clear Modes
}
key during operation, the standby
display appears.
Note
❒
This machine automatically returns to standby mode if you do not use the
machine for a certain period of time. You can select the period using the Fac-
simile Auto Reset Timer in System Settings.
❒
You can have the machine return to standby mode after each transmission us-
ing User Parameters (switch 17, bit 3) in the Facsimile Features menu.
❒
To manually return to the standby display, do one of the following:
• If you have placed the original in the Auto Document Feeder (ADF) and
have not pressed the
{
Start
}
key, remove the original.
• If you have not placed an original, press the
{
Clear Modes
}
key.
• If you are in User Tools mode, press the
{
User Tools/Counter
}
key.
Reference
“System Settings”, General Settings Guide
“Facsimile Features”, General Settings Guide
“Registering Addresses and Users for Facsimile/Scanner Functions”, Gener-
al Settings Guide