Xerox C230, User Manual, Page: 79 / 194

Menu Item
Description
PCL5 Minimum Line Width
1–30 (2*)
Set the initial minimum stroke width.
Note: Jobs printed in 4800 CQ use half the
value.
PCLXL Minimum Line Width
1–30 (2*)
A4 Width
• 198mm*
• 203mm
Set the width of the logical page on A4-size paper.
Note: Logical page is the space on the
physical page where data is printed.
Auto CR after LF
• Off*
• On
Set the printer to perform a carriage return after a
line feed control command.
Note: Carriage return is a mechanism that
commands the printer to move the position of
the cursor to the first position on the same
line.
Auto LF after CR
• Off*
• On
Set the printer to perform a line feed after a carriage
return control command.
Print Timeout
• Disabled
• Enabled* [90]
Set the printer to end a print job after it has been
idle for the specified amount of time in seconds.
Note: Print Timeout Time appears only in
some printer models.
Print Timeout Time
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.
IIm maaggee
Menu Item
Description
Auto Fit
• On
• Off*
Select the best available paper size and orientation
setting for an image.
Note: When set to On, this menu item
overrides the scaling and orientation settings
for the image.
Invert
• Off*
• On
Invert bitonal monochrome images.
Note: This menu item does not apply to GIF
or JPEG image formats.
Scaling
• Anchor Top Left
• Best Fit*
• Anchor Center
Adjust the image to fit the printable area.
Note: When Auto Fit is set to On, Scaling is
automatically set to Best Fit.
Xerox ® C230 Color Printer
User Guide
79
Use printer menus