Xerox B410, User Manual, Page: 94 / 256

M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
– Enable NTP (On*)
– NTP Server
– Enable Authentication (None*)
– Key ID
– Password
PPaappeerr SSiizzeess
• U.S.*
• Metric
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the
initial setup wizard determines the initial paper
size setting.
SSccrreeeenn B Brriigghhttnneessss
20–100% (100*)
Adjust the brightness of the display.
FFllaasshh D Drriivvee A Acccceessss
• Disabled
• Enabled*
Enable access to the flash drive.
SSccrreeeenn TTiim meeoouutt
5–300 (60*)
Set the idle time in seconds before the display shows
the home screen, or before the printer logs out a user
account automatically.
Note: An asterisk (*) next to a value indicates the factory default setting.
E C O - M O D E
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
PPrriinntt
• Sides (1-Sided*)
• Pages per Side (Off*)
• Toner Darkness (4*)
Configure the print settings of the printer.
Note: An asterisk (*) next to a value indicates the factory default setting.
94
Xerox
®
B410 Printer User Guide
Use Printer Menus