Xerox B235, User Manual

Page: 143 / 316

Paper
T R AY C O N F I G U R AT I O N
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
D Deeffaauulltt SSoouurrccee
• Tray [x] (1*)
• Manual Paper
• Manual Envelope
Set the paper source for all print jobs.
PPaappeerr SSiizzee//TTyyppee
• Tray [x] (1*)
• Manual Paper
• Manual Envelope
Specify the paper size or paper type loaded in each
paper source.
SSuubbssttiittuuttee SSiizzee
• Off
• Letter/A4
• All Listed*
Set the printer to substitute a specified paper size if the
requested size is not loaded in any paper source.
• Off prompts the user to load the required paper
size.
• Letter/A4 prints an A4-size document on letter
when loading letter, and letter-size jobs on A4
paper size when loading A4.
• All Listed substitutes Letter/A4.
Note: An asterisk (*) next to a value indicates the factory default setting.
M E D I A C O N F I G U R AT I O N
Universal Setup
M MEEN NU U IITTEEM M D DEESSC CRRIIPPTTIIO ON N
U Unniittss ooff M Meeaassuurree
• Inches
• Millimeters
Specify the unit of measurement for the universal
paper.
Note: Inches is the U.S. factory default setting.
Millimeters is the international factory default
setting.
PPoorrttrraaiitt W Wiiddtthh
• 3.00–14.17inches (8.50*)
• 76–360mm (216*)
Set the portrait width of the universal paper.
PPoorrttrraaiitt H Heeiigghhtt
• 3.00–14.17inches (14*)
• 76–360mm (356*)
Set the portrait height of the universal paper.
Xerox
®
B225/B235 Multifunction Printer User Guide
143
Use printer menus