Xerox B235, User Manual

Page: 13 / 316

Product Statements
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
To avoid the risk of fire or electrical shock, use only the power cord
provided with this product or the manufacturer authorized replacement.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
Do not use this product with extension cords, multi-outlet power
strips, multi-outlet extenders, or UPS devices. The power capacity of these types of accessories can be
easily overloaded by a laser printer and may result in a risk of fire, property damage, or poor printer
performance.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
Do not use this product with an inline surge protector. The use of a
surge protection device may result in a risk of fire, property damage, or poor printer performance.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
To reduce the risk of fire, use only a 26 AWG or larger
telecommunications RJ-11 cord when connecting this product to the public switched telephone network.
For users in Australia, the cord must be approved by the Australian Communications and Media Authority.
C CA AU UTTIIO ON N— —SSH HO OC CKK H HA AZZA ARRD D::
To avoid the risk of electrical shock, do not place or use this product
near water or wet locations.
C CA AU UTTIIO ON N— —SSH HO OC CKK H HA AZZA ARRD D::
To avoid the risk of electrical shock, do not set up this product or make
any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a lightning
storm.
C CA AU UTTIIO ON N— —PPO OTTEEN NTTIIA ALL IIN NJJU URRYY::
Do not cut, twist, bind, crush, or place heavy objects on the power
cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects
such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results. Inspect
the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.
C CA AU UTTIIO ON N— —SSH HO OC CKK H HA AZZA ARRD D::
To avoid the risk of electrical shock, make sure that all external
connections, such as Ethernet and telephone system connections, are properly installed in their marked
plug-in ports.
C CA AU UTTIIO ON N— —SSH HO OC CKK H HA AZZA ARRD D::
To avoid the risk of electrical shock, if you are accessing the controller
board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.
Xerox
®
B225/B235 Multifunction Printer User Guide
13
Safety